Tuesday 26 June 2018

Save Over $300 With These 2 Water-Saving Ideas!

Did you know that less than 1% of all the water on Earth can be used by people? As our population grows, more and more people are using up this limited resource. Therefore, it is important that we use our water wisely and not waste it.

Given that time of the Summer Vacation when the kids will be home, we want to help you reduce the water bill,save some money, and save the planet all at the same time. Chester Charles from our plumbing department has two water-saving ideas to do just that.

1 - The HydroRight Dual Flush Valve
2 - The HydroClean Fill Valve

The HydroRight, Chester boasts, is that product which is going to save you about 15,000 gallons of water a year which equates to about $300.00 or even more. Chester Charles, a Product Manager responsible for our Plumbing Department gave a brief synopsis of the HydroRight. “It’s so easy to install, under 10 minutes with no tools [in your toilet],” he said. “Central to dual-flush technology is the water savings that can be realized by a quick-flush setting using lower water volumes for liquids and paper. A second, full-flush setting uses the standard amount of water for solids.” He continued.

Chester believes that four out of five flushes used for liquid and paper, require only the amount of water used in the quick-flush setting—meaning 80 percent of flushes waste money and water on all toilets that are not dual flush.

In closing, Chester had this piece of advice to our friends and customers, “Not only does the HydroRight help to preserve natural resources, it also proves to be more economical than purchasing an entirely new dual-flush toilet, which can cost upward of several hundred dollars.”
The HydroClean solves the two biggest reasons for water loss in toilets; miscalibration and leaks. “It easily calibrates to adjust the exact amount of water needed in the tank, refills quickly and jets clean the tank,” he reiterates. A unique feature of this product Chester says is its ability to detect and signal leaks when a leak is found. It is designed to fit most standard toilets.

Here is a comparative table of the two products:

The HydroRight Dual Flush Valve
The HydroClean Toilet Fill Valve
  • Easily converts a standard toilet into a two-button, dual flush toilet
  • Drop-in installation with no tools or tank removal needed
  • Fits 1.6 to 3.5+ gpf toilets with 2 in. flush valve
  • Permafit silicone seal is chemical  resistant and will not warp
  • Eliminates the most common problems in toilets: the flapper, chain and handle
  • Includes push-button handle, flush activator


  • Water-saving toilet fill valve with built-in mini-valve® that adjusts tank refill water level
  • Calibrates to adjust the exact amount of water needed to help save on water usage
  •  Mini valve to control amount of water going back into the bowl
  •  Sounds an audible alert when a leak is detected
  •  Shut off feature at the top of the valve quickly shuts off valve if tank is overflowing
  •  Refills quickly: height adjusts from 11 in. to 13.8 in. 
  • Smart Nut™ helps with easy installation without tools in most standard toilets
  •  Detects leaks
  •  Cleans the tank
  •  Installs easily without tools
  •  Calibrates your toilet for full flush efficiency




Shop our HydroRight or HydroClean today and save big on your utilities bill.


No comments:

Post a Comment

THE COUNTDOWN TO CHRISTMAS: ONLY 7 FRIDAYS TO DECK THE HALLS WITH NAVITA DESIGNS

  The holiday season is right around the corner, and the countdown has officially begun! With only seven Fridays left until Christmas, there...